Bently Nevada TP100 is a rugged 100 mV/g general purpose accelerometer designed for vibration monitoring in space-constrained industrial zones.

Features and benefits

• Rugged construction of the Bently Nevada TP100 Accelerometer ensures reliable operation in harsh industrial environments.

• Corrosion-resistant and hermetically sealed design for long service life.

• Wide frequency response from low to high vibration ranges.

• Clear and stable signals even at low vibration levels.

• Case-isolated structure reduces electrical interference and noise.

• Suitable for monitoring slow-turning equipment such as fans and gearboxes.

Specific Application

• Vibration monitoring in harsh industrial environments and installations with limited available space.
• Condition monitoring optimization for slow-turning machinery such as cooling tower fans and slow-speed gearboxes.
• Simultaneous detection of low- and high-speed vibrations using a single sensor configuration.

System Compatibility and Alternative Models

System Compatibility: Interfaces seamlessly with a wide range of standard machinery condition monitoring solutions. It requires an IEPE power source (18 - 30 VDC excitation voltage, 2 - 10 mA regulated current) and connects via a standard 2-pin MIL-C-5015 connector using shielded, twisted pair cabling (such as Bently Nevada 9571, 84661, or 89477 cables).

Alternative Model: TP500 General Purpose Accelerometer.

Key Differences:

Sensitivity: TP100 offers 100 mV/g sensitivity, whereas TP500 provides a higher sensitivity of 500 mV/g.

Measurement Range: TP100 measures up to an 80 g peak acceleration range, while TP500 is restricted to a 10 g peak range.

Frequency Response (±5%): TP100 operates from 3 to 5,000 Hz, while TP500 extends lower from 0.7 to 5,000 Hz.

Ordering Information Summary

Sensor Unit & Accessories

TP100 General Purpose Accelerometer: Includes 1/4-28 to 1/4-28 stud, 1/4-28 to M8 mounting stud, box, and calibration data.

Compatible Interconnection Cables

• 9571: Cable with a 2-pin straight connector.
• 84661: Cable with a 2-pin straight connector protected by armor.
• 89477: Cable with a 2-pin 90-degree right-angle connector.

Standard Cable Length Options

• 6 ft (1.8 m) | 8 ft (2.4 m) | 10 ft (3.0 m) | 12 ft (3.6 m) | 15 ft (4.5 m)
• 17 ft (5.0 m) | 20 ft (6.0 m) | 25 ft (7.6 m) | 30 ft (9.0 m) | 33 ft (10.0 m)
• 50 ft (15.2 m) | 99 ft (30.0 m)

Custom Cable Configurations (Ordered in 1.0 ft increments)

• 9571-NN: Two-conductor twisted, shielded 22 AWG cable. Two-socket moisture-resistant female connector at one end, terminal lugs at the other. (Min: 2.0 ft / Max: 99 ft).
• 84661-NN: Two-conductor twisted, shielded 22 AWG armored cable. Two-socket moisture-resistant female connector at one end, terminal lugs at the other. (Min: 3.0 ft / Max: 96 ft).
• 106765-NN: Two-conductor 22 AWG twisted, shielded cable. Two-socket plug with a fluorosilicone elastomer boot at one end, terminal lugs at the other. (Min: 2.0 ft / Max: 99 ft. Must be ordered in increments of 3 meters).

• FAQ

Q1: What is the function of the 6GK1415-2AA10 module?
A1: The Siemens 6GK1415-2AA10 is used to enable reliable industrial communication and data exchange within automation networks.

Q2: Which systems support the 6GK1415-2AA10?
A2: The Siemens 6GK1415-2AA10 is designed for integration with Siemens SIMATIC Industrial Ethernet systems.

Q3: What are the key advantages of the 6GK1415-2AA10?
A3: It offers stable network connectivity, high reliability, and efficient communication for industrial automation.

Q4: Where is the 6GK1415-2AA10 commonly used?
A4: It is widely used in manufacturing, process control, and industrial automation environments.

Q5: Is the 6GK1415-2AA10 suitable for continuous operation?
A5: Yes, it is designed for reliable, long-term operation in demanding industrial conditions.